ATP Turbo GTX3071R Internally Gated Turbo Subaru Models WRX 02-07/STI 04-17
- Brand: ATP Turbo
- Part #: ATP-SUB-020
- Bearing Type: Ball Bearing
- Cartridge: Garrett
- Fitment: OEM Upgrade
- Gaskets Included: Yes
- Inlet Size: 3.0in
- Oil Line Included: Yes
- Rated Horsepower: 450hp
- Scroll: Single
- Wastegate: Internal
- Mfgr. Warranty: 12 Months
Each GTX drop-in turbo package consists of a Garrett factory assembled and high speed balanced dual ball bearing CHRA which is then assembled into a set of CNC machine ported housings that have been optimized in every aspect for maximum flow and efficiency.
All accompanying oil and coolant supply components included in each kit have been designed to properly and seamlessly bridge the Garrett GTX turbo to the EJ engine so that the fit is as OE as possible.
Just bolt the turbo on, add fueling and a good tune and prepare for a blast of acceleration. Garrett GTX turbos offer more than just "peak HP" numbers. These GTX turbos off more torque area under the curve and more "accessible" power than any other turbos series out there.
We do recommend that you compliment your GTX bolt-on turbo with a nice high flowing bellmouth downpipe and a high flowing inlet pipe to effortless channel air in and out of the turbo. Although every bolt-on GT turbo ships with a 3" inlet, we do provide a "stepdown" sleeve just in case you're forced to use the stock 2.25" inlet hose. However, as a rule of thumb, turbos, especially higher flowing units love as much inlet flow as possible. This promotes both quicker spoolup and better ultimate HP, with less boost pressure at the manifold. The 3" downpipe and bigger inlet is critical for reaching peak efficiency on the GT turbo. Please also be aware that some downpipes such as the stock catted downpipe, has a "no-flow" door at the wastegate flapper area. This type of downpipe may not allow the wider swinging wastegate valve to open all the way, thus causing the possibility of a "boost-creep" condition or uncontrollable rise in boost.
The GTX3071R is a great match on the 2.5L, especially if you're looking for boost threshold that is close to stock but want enough airflow for 450+HP. Almost all the boost is available all the time even at part to medium throttle. Boost recovery between gearshifts is awesome with full boost ready even before upshift is complete as the STI lurches forward with shear enthusiasm at the onset of each gear. The 2.0L driver should not rule out the use GTX3071R if his HP target is in the same range. The modern generation wheels, coupled with an awesome wheel ratio, allows even the smaller displacement engine to provide adequate motivation to get the GT3071R going for an great powerband. The competition grade turbo still offers the best response and spooltime out of any unit in this flow range.
What sets the GTX apart from the GT series turbo is the new high flowing 11 blade next generation compressor wheel.
2 uppipe gaskets will be needed if using the included spacer.
We Also Recommend
ACL Race Main Bearing Set Standard Size Position 5 Subaru Impreza 98-11/WRX 02-14/STI 04-17/Legacy 90-13/Legacy GT 05-12/Forester 98-10/Forester XT 04-13
ACL Race Rod Bearings Standard Size 52mm Journal Subaru Impreza 98-11/WRX 02-14/STI 04-17/Legacy 90-13/Legacy GT 05-12/Forester 98-10/Forester XT 04-13
ACT Heavy Duty 6 Puck Clutch Kit Subaru Legacy GT (Spec B.) 07-09/STI 04-18
ACT Heavy Duty Performance Street Disc Clutch Kit Subaru STI 04-15/Legacy GT 07-09 (spec B)