Aluminati Aftermarket Manifold Adapter
- Brand: Aluminati
- Part #: ALM-MANI-ADAP
- Color: Billet Finish
- Warranty: Lifetime
This adapter will allow you to mount the Aluminati Coolant Expansion Tank on your Process West or Cosworth intake manifold.
For mounting to Process West. Remove 2 (M6) center screws holding manifold flange to TGV. Add 2 (M6) 35mm long screws to adapter with relief in adapter facing manifold. Bolt adapter to manifold flange and add tank. Note due to the tight clearances you may be required to relieve the adapter slightly. If desired you can use the instructions below for the Cosworth on the Process West for more clearance.
For mounting to Cosworth. Remove 2 (M8) center screws holding TGV to head. Add plate reusing 2 (M8) screws to TGV. Add (2) M6 16mm long screws to adapter with relief in adapter facing manifold. Bolt adapter to plate and add tank. Note due to the tight clearances you may be required to relieve the adapter slightly.
TANK NOT INCLUDED! Used for reference.
Machined from billet 6061 aluminum
Comes w/adapter, plate and install hardware
Made in the USA
Compatible vehicles running the following aftermarket manifolds:
Process West Intake Manifold
Cosworth Intake Manifold
We Also Recommend
Aluminati Solid Transmission Mount Black Subaru WRX 02-20/STI 04-20/Legacy GT 05-09/Forester XT 04-11/Impreza 93-11
Aluminati Solid Pitch Stop Mount Black Subaru WRX 02-21/STI 04-21/Legacy GT 05-09/Impreza 93-11
Aluminati Solid Engine Mounts Subaru WRX 02-14/STI 04-20/Forester XT 04-13/Legacy GT 05-09/Impreza 93-11