• Brand: HKS
  
• Part #: 22002-AN038
  
• Cam Exhaust Duration: 278
• Cam Intake Duration: 270
• Location: Intake and Exhaust
  
• Machining Required: No
  
• QTY: 4
  
• Springs Included: Yes
  
• Mfgr. Warranty: No Warranty

 *Special order item, contact us for availability. Non refundable.

HKS requirements for high performance cams.

To smoothly take in air and exhaust, i.e. to make the valve move both in and out with accuracy under any circumstance. Absolute power at high RPM Accelerator Response at low-mid RPM Stable idle

Development possible because of true "In-house" production

When HKS refer to "in-house", it does not simply mean to produce everything with our own facilities. HKS does build from the ground up instead of looking for a guide from the vehicle manufacturers. The design, processing, test and production are all linked together with particular attention, therefore, the testing and redesigning are based on those results. The results of this R&D are then reflected on the final production of the items. All of this is necessary to provide the customer a product which they can be truly feel happy with and to maintain HKS' position as the pioneer in the tuning industry From

"Bolt-on" to Full Tune-up Specifications.

The Right Profile to Extract Maximum Performance from Engine

Variation Line-up

SS-CAM (STEP1)

HKS SS-Cam are designed to fit unmodified cylinder heads with stock valve springs to be a simple bolt on cam kit that can give added performance without changing any other parts or the valve timing. By changing cams, cam duration and lift are altered making the ideal valve timing different. HKS SS-Cams have been tested on the engine bench to find the optimum valve timing and the knock pin has been relocated in a modified position to offer perfect valve timing, by simply replacing stock cams with no need for measurement or adjustment.

STEP2 / STEP3 (Pro)

STEP2 Offering more power over SS-Cams through increased lift. However, strengthened valve springs (RB26 also require Piston recess modification and Cam clearance on head) are required.

STEP3 (Pro) Camshafts designed for further power and high rpm use over step 2. The following parts will be necessary for installation: (SR20) HKS Lash Killer Kit, Need to change the strengthened valve springs.